Best Trailer Hubs & Spindles 2021

1,737,918 Reviews Analysed
674 Review Articles Examined

After deep searching of an insanely large number of articles and reviews by our brilliant AI and Machine Learning algorithms; and exhaustive processing, assessment and infiltration by our professional technology gurus, the golden shortlist for the Best Trailer Hubs & Spindles (2021) is ultimately drafted.

The ultimate guide on Best Trailer Hubs & Spindles produced using Deep Learning and Artificial Intelligence technology
Exclusively at AGR reviews

In order to find the Best Trailer Hubs & Spindles (2021), our brilliant platforms and gurus have taken many elements into account such as product fitness for use, features that meet consumers needs and give buyer satisfaction, defect-free, standards conformance, value-for-money, service requirements, quality of design, quality conformance to needs and regulations, protection and safety, actual user satisfaction and numerous others. It is of great importance to mention that each user has different requirements so please use the below list as a guide and not as a gospel. Nonetheless, in the below shortlist you can certainly find the overall best ones despite your needs.

Our intelligent platforms and competent high-tech gurus work hard to provide you with the best product options. We believe that our review analysis can help you simplify your purchase decision and select among the very Best Trailer Hubs & Spindles (2021).

Best Trailer Hubs & Spindles

Best Choice No. 1

The ROP Shop (Pack of 2) Trailer Axle Kits with 4 on 4″ Bolt Idler Hub & 1″ Round BT8 Spindle

Replacement (Pack of 2) Trailer Axle Kits with 4 on 4″ Bolt Idler Hub & 1″ Round BT8 Spindle
Specs – 1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4″ Shaft 2 Diameter: 1″ Shaft Length: 8 3/4″ (4″ Long Stub) Hub A Diameter.: 2 1/2″ Hub B Diameter: 5 1/2″ Bolt Pattern: 4″. Refer to images 2 & 3 for more information
Includes – (2) Idler Hub with Lug Nuts, (2) 1″ BT8 Round Spindle with Castle Nut, Pin & Washer, (4) Inner/Outer Bearings, (2) Double-lip Grease Seal (1 1/4″ I.D. / 2″ O.D.), (2) 2″ Grease/Dust Cap; comes as shown in the first image
Assembly with 4 on 4″ bolt idler hub & 1″ round BT8 spindle. Rated to 1,250 lbs. each or 2,000 lbs. for the pair
Fits 2,000 pound trailer axles with straight spindles, but to know if this hub is the right fit for your setup you would want to check the size your current bearings and make sure that they match up with the 1″ bearings that these hubs come with as well as knowing that you have a standard length spindle. This Hub fits standard length spindles, not “short spindles”

Best Choice No. 2

SOUTHWEST WHEEL 2,000 lbs Trailer Axle Spindle with 5-4.5″ Bolt Circle Hub

1 1/4″ Diameter, 3 3/8″ long shaft, BT8 1″ spindle.
Spindle includes spindle nut, spindle washer, and cotter pin.
5-4.5″ BT8 hub pre raced and studded.
Hub includes inner and outer bearing L44643, seal, grease cap, and lug nuts.
Rated at 1000 lbs. per spindle, two will hold 2,000 lbs.

Best Choice No. 3

Southwest Wheel R20484X 84 Spindle & 5-4.5″ Bolt Circle Trailer Hub

Round R20484X 84 Spindle & 5-4.5″ Bolt Circle Trailer Hub
5 studs 4.5″ Bolt circle using L68149 inner and L44649 outer bearing hub
84 Spindle
Includes Hub, inner bearing, outer bearing, seal, grease cap & lug nuts
Round 84 Spindle, Spindle width =1 1/2″ Spindle length=4″ Overall length =8 7/8″ Capacity (pair) 2,000 lbs

Best Choice No. 4

The ROP Shop (Pack of 4) Trailer Axle Kits with 4 on 4″ Bolt Idler Hub & 1″ Round BT8 Spindle

Replacement (Pack of 4) Trailer Axle Kits with 4 on 4″ Bolt Idler Hub & 1″ Round BT8 Spindle
Specs – 1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4″ Shaft 2 Diameter: 1″ Shaft Length: 8 3/4″ (4″ Long Stub) Hub A Diameter.: 2 1/2″ Hub B Diameter: 5 1/2″ Bolt Pattern: 4″. Refer to images 2 & 3 for more information
Includes – (4) Idler Hub with Lug Nuts, (4) 1″ BT8 Round Spindle with Castle Nut, Pin & Washer, (8) Inner/Outer Bearings, (4) Double-lip Grease Seal (1 1/4″ I.D. / 2″ O.D.), (4) 2″ Grease/Dust Cap; comes as shown in the first image
Assembly with 4 on 4″ bolt idler hub & 1″ round BT8 spindle. Rated to 1,250 lbs. each or 2,000 lbs. for the pair
Fits 2,000 pound trailer axles with straight spindles, but to know if this hub is the right fit for your setup you would want to check the size your current bearings and make sure that they match up with the 1″ bearings that these hubs come with as well as knowing that you have a standard length spindle. This Hub fits standard length spindles, not “short spindles”

Best Choice No. 5

Southwest Wheel Square R50642X 42 Spindle & 8-6.5″ Bolt Circle Trailer Hub

Square R50642X 42 Spindle & 8-6.5″ Bolt Circle Trailer Hub.
8 studs 6.5″ Bolt circle using 25580 inner and 14125A outer bearing hub.
42 Spindle
Includes Hub, inner bearing, outer bearing, seal, grease cap & lug nuts.
42 Spindle, Spindle width =2 1/4″ Spindle length=6″ Overall length =11 1/16″ Capacity (pair) 5,000 lbs.

Best Choice No. 6

Rigid Hitch Pair of 4-Bolt On 4 Inch Hub Assembly (AKSQ-220044) Includes (2) Square Shaft 1-1/16 Inch Straight Spindles & Bearings

Pair of 1-1/16″ straight spindles includes castle nuts and cotter pins.
Bearings included – (4) L-44649 1-1/16″ inside dimension
Hubs have pre-installed pressed in races
Hub has a 4-bolt pattern on 4″ bolt circle. Pilot diameter 2-1/2″, flange diameter 5.56″ and measures 4-1/4″ tall (through center of hub)
Spindles feature a SQUARE 1-1/2″ stock diameter with a bearing surface of 1-1/16 inch.

Best Choice No. 7

Rigid Hitch Pair of 5-Bolt on 5 Inch Hub Assembly (AKSQ-350055) Includes (2) Square Stock 1-3/8 Inch to 1-1/16 Inch Tapered Spindles & Bearings

Pair of 1-3/8″ to 1-1/16″ tapered spindles.
Bearings included – (2) L-68149 1-3/8″ I.D & (2) L-44649 1-1/16″ I.D
Hubs have pre-installed pressed in races.
Hub has a 5-bolt pattern on 5″ bolt circle. Pilot diameter 2.59″, flange diameter 6-1/2″ and measures 4-1/4″ tall (through center of hub)
Spindles feature a SQUARE 1-3/4″ stock diameter with a tapered spindle surface of 1-3/8″ & 1-1/16″

Best Choice No. 8

SOUTHWEST WHEEL 2,000 lbs Trailer Axle Spindle with 4-4″ Bolt Circle Hub

1 1/4″ Diameter, 3 3/8″ long shaft, BT8 1″ spindle.
Spindle includes spindle nut, spindle washer, and cotter pin.
4-4″ BT8 hub pre raced and studded.
Hub includes inner and outer bearing L44643, seal, grease cap, and lug nuts.
Rated at 1000 lbs. per spindle, two will hold 2,000 lbs.

Best Choice No. 9

R and P Carriages Build Your Own Trailer Axle 4 x 4 Bolt Hub Assembly with 1″ Straight Round Spindles & Bearings

Pair of 1″ straight spindles includes castle nuts and cotter pins.
Bearings included – (4) L-44643 1″ inside dimension x 1.98″ Outer Dimension
Races are Pressed in to Hubs
Hub has a 4-bolt pattern on 4″ bolt circle. Pilot diameter 2-1/2″, flange diameter 5.56″ and measures 4-1/4″ tall (through center of hub)
Spindles feature a ROUND 1-1/4″ stock diameter with a bearing surface of 1 inch.

Best Choice No. 10

Rigid Hitch Trailer Hub Kit (BT-150-04-A) 5 Bolt on 4-1/2″ Bolt Circle with 1 Inch I.D. Bearings

Fits 2,000 lb. axles with 1″ straight spindle
Complete assembly with bearings, seal, dust cap, cotter pin and lug nuts
Measures 4-1/4 inches tall (through center of hub)
2,000 lb capacity – 1/2-20 thread – 5 bolt on 4-1/2 inch bolt circle
Read product description below for more information

If you have found our review benchmarking useful, please do not hesitate to subscribe for more astonishing reviews. Bear in mind that our subscribers benefit from exclusive Amazon.com promo codes of up to 80% discount. That’s right, up to 80%! Do not miss them!.

Best Trailer Hubs & Spindles 2021

1,737,918 Reviews Analysed674 Review Articles Examined

Best Trailer Hubs & Spindles

You may also like…

Related Posts

Best Automotive Door Panel Light Bulbs 2021

Best Antitheft Keyless Entry Systems 2021

Best Keychains 2021

Best Engine Part Cleaners 2021

1,737,918 Reviews Analysed
674 Review Articles Examined