Best Digital Multiplexers 2021

258,275 Reviews Analysed
166 Review Articles Examined

After exploring an incredibly large number of articles and reviews by our smart Artificial Intelligence & ML engines; and deep refining, breakdown and rectification by our specialist high-technology experts, the golden shortlist for the Best Digital Multiplexers (2021) is ultimately prepared.

The ultimate guide on Best Digital Multiplexers produced using Deep Learning and Artificial Intelligence technology
Exclusively at AGR reviews

In order to obtain the Best Digital Multiplexers (2021), our powerful platforms and experts have taken many criteria into account such as product fitness for use, features that meet consumers needs and give buyer satisfaction, defect and deficiency-free, standards conformance, worthiness-for-money, credibility, user-friendly design, quality conformance to user requirements and guidlines, protection and safety, actual user satisfaction and many others. It is of great importance to note that each user has different needs so please use the below list as a guide and not as a gospel. Nevertheless, in the below ranking you can certainly find the overall best ones despite your needs.

Our brilliant platforms and skillful technology gurus work hard to identify the best product choices. We believe that our review benchmarking can help you simplify your purchase decision and select among the truly Best Digital Multiplexers (2021).

Best Digital Multiplexers

Best Choice No. 1

ACEIRMC 10pcs CD74HC4067 16-Channel Analog Digital Multiplexer Breakout Board Module for Arduino 2V-6V Microcontroller 16 Device RX Lines

This is a breakout board for the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer CD74HC4067. This chip is like a rotary switch – it internally routes the common pin (COM in the schematic, SIG on the board) to one of 16 channel pins (CHANxx)
It works with both digital and analog signals (the voltage can’t be higher than VCC), and the connections function in either direction.
Analog output: DIG;Channel control: S0-S3
This is a breakout board for the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer CD74HC4067.
To control it, connect 4 digital outputs to the chip’s address select pins (S0-S3), and send it the binary address of the channel you want. This allows you to connect up to 16 sensors to your system using only 5 pins!

Best Choice No. 2

NOYITO CD74HC4067 CMOS 16-Channel Digital Analog Multiplexer Breakout Module for Arduino

Function: Use 16 ADCs to collect 16 analog signals.
Use the CD74HC4067 16-channel analog signal switch;Analog signal input: C0-C15 16 channels.
Analog output: DIG;Channel control: S0-S3
This is a breakout board for the very handy 16-Channel Analog / Digital Multiplexer / Demultiplexer CD74HC4067.
This chip is like a rotary switch – it internally routes the common pin (COM in the schematic, SIG on the board) to one of 16 channel pins (CHANxx). It works with both digital and analog signals (the voltage can’t be higher than VCC), and the connections function in either direction.

Best Choice No. 3

HiLetgo CD74HC4067 CMOS 16 Channel 16 CH Digital Analog Multiplexer Breakout Module for Arduino

Function: Use 16 ADCs to collect 16 analog signals.
Use the CD74HC4067 16-channel analog signal switch;Analog signal input: C0-C15 16 channels.
Analog output: DIG;Channel control: S0-S3
This is a breakout board for the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer CD74HC4067.
This chip is like a rotary switch – it internally routes the common pin (COM in the schematic, SIG on the board) to one of 16 channel pins (CHANxx). It works with both digital and analog signals (the voltage can’t be higher than VCC), and the connections function in either direction.

Best Choice No. 4

Andifany 10Pcs 16CH Analogue Multiplexer Module 74HC4067 CD74HC4067 Precise Module Digital Multiplexer MUX Breakout Board

Because the multiplexer can also process digital signals, you can use it to transfer TTL-level serial data to multiple devices through pipe or transfer from multiple devices.
Drive it to a high level, and it will completely disconnect the common pins (all switches are disconnected).
It is suitable for digital and analog signals (voltage cannot be higher than VCC) and can be connected in either direction. To control this, please connect the four digital outputs to the address selection pin of the chip (SO-S3) and send it the binary address of the desired channel.
This is a very convenient 16 channel CD74HC4067 analog/digital multiplexer/demultiplexer.
The internal switch is bidirectional, with a low on resistance and off leakage, and to prevent cross talk, please turn off the switch first and then on.

Best Choice No. 5

Ximimark 2Pcs 16CH Analog Digital Multiplexer Breakout Board Module CD74HC4067 CMOS Precise Module for Arduino

This is a breakout board for the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer CD74HC4067. This chip is like a rotary switch – it internally routes the common pin (COM in the schematic, SIG on the board) to one of 16 channel pins (CHANxx).
It works with both digital and analog signals (the voltage can’t be higher than VCC), and the connections function in either direction.
To control it, connect 4 digital outputs to the chip’s address select pins (S0-S3), and send it the binary address of the channel you want. This allows you to connect up to 16 sensors to your system using only 5 pins!
Since the mux/demux also works with digital signals, you can use it to pipe TTL level serial data to or from multiple devices. For example, you could use it to connect the TX pins of 16 devices to one RX pin on your microcontroller. You can then select any one of those 16 devices to listen to. If you want two-way communications,you can add a second board to route your microcontroller’s TX line to 16 device’s RX lines. By using multiple boards, you can create similar arrangements for I2C,SPI,etc.
The internal switches are bidirectional, support voltages between ground and VCC, have low “on” resistance and low “off” leakage, and to prevent crosstalk, perform “break-before-make” switching. The board also breaks out the chip’s “enable” pin, which when driven high, will completely disconnect the common pin (all switches “off”).

Best Choice No. 6

UMLIFE 6pcs CD74HC4067 CMOS 16 Channel 16 CH Digital Analog Multiplexer Breakout Module for Arduino

This is a breakout board for the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer CD74HC4067.
Use the CD74HC4067 16-channel analog signal switch;Analog signal input: C0-C15 16 channels.
IT can be used the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer CD74HC4067.
Analog output: DIG;Channel control: S0-S3
Wide operating temperature range: -55C to 125C

Best Choice No. 7

Rasbee 16 Channel 16 CH Digital Analog Multiplexer Breakout Module CD74HC4067 CMOS Precise Board 2V-6V for Arduino

Use 16 ADCs to collect 16 analog signals. Use the CD74HC4067 16-channel analog signal switch;Analog signal input: C0-C15 16 channels. Analog output: DIG;Channel control: S0-S3 , This chip is like a rotary switch – it internally routes the common pin (COM in the schematic, SIG on the board) to one of 16 channel pins (CHANxx)
It works with both digital and analog signals (the voltage can’t be higher than VCC), and the connections function in either direction. To control it, connect 4 digital outputs to the chip’s address select pins (S0-S3), and send it the binary address of the channel you want. This allows you to connect up to 16 sensors to your system using only 5 pins!
Since the mux/demux also works with digital signals, you can use it to pipe TTL level serial data to or from multiple devices. For example, you could use it to connect the TX pins of 16 devices to one RX pin on your microcontroller. You can then select any one of those 16 devices to listen to. If you want two-way communications,you can add a second board to route your microcontroller’s TX line to 16 device’s RX lines. By using multiple boards, you can create similar arrangements for I2C,SPI,etc.
The internal switches are bidirectional, support voltages between ground and VCC, have low “on” resistance and low “off” leakage, and to prevent crosstalk, perform “break-before-make” switching. The board also breaks out the chip’s “enable” pin, which when driven high, will completely disconnect the common pin (all switches “off”).
Package Contents: 3 x 16 Channel 16 CH Digital Analog Multiplexer Breakout Module CD74HC4067 CMOS Precise Board 2V-6V

Best Choice No. 8

SEEU. AGAIN 2PCS CD74HC4067 16 Channel Analog Digital Multiplexer MUX Breakout Board CD74HC4067 Precise Module DIY

★This is a breakout board for the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer CD74HC4067.
★2V to 6V operation
★6ns break-before-make @ 4.5V,”On” resistance: 70 Ohms @ 4.5V
★Wide operating temperature range: -55C to 125C
★Package Includes: 1PCS 16 Ch. Mulitplexer,2PCS Header Pins as shown above

Best Choice No. 9

WINGONEER CD74HC4067 CMOS 16 Channel 16 CH Digital Analog Multiplexer Breakout Module for Arduino – 5pcs

Use 16 ADCs to collect 16 analog signals.
Use the CD74HC4067 16-channel analog signal switch;Analog signal input: C0-C15 16 channels.
Analog output: DIG;Channel control: S0-S3
This is a breakout board for the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer CD74HC4067.
This chip is like a rotary switch – it internally routes the common pin (COM in the schematic, SIG on the board) to one of 16 channel pins (CHANxx)

Best Choice No. 10

DEVMO 2PCS CD74HC4067 16 Channel Analog Digital Multiplexer MUX Breakout Board CD74HC4067 Precise Module Compatible with Ar-duino DIY

★This is a breakout board for the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer CD74HC4067.
★2V to 6V operation
★6ns break-before-make @ 4.5V,”On” resistance: 70 Ohms @ 4.5V
★Wide operating temperature range: -55C to 125C
★Package Includes: 1PCS 16 Ch. Mulitplexer,2PCS Header Pins as shown above

If you have found our review benchmarking handy, please do not hesitate to subscribe for more amazing reviews. Bear in mind that our subscribers benefit from unique Amazon.com promotion codes of up to 80% discount. That’s right, up to 80%! Do not miss them!.

Best Digital Multiplexers 2021

258,275 Reviews Analysed166 Review Articles Examined

Best Digital Multiplexers

You may also like…

Related Posts

Best Drywall Lifts 2021

Best Safety Kneepads 2021

Best Medical Record Keeping & Labels 2021

Best Expansion Bolts 2021

258,275 Reviews Analysed
166 Review Articles Examined